START board for model railroad 120x80x10cm

START board 120 x 80 x 10 cm with cover. The board is delivered ready-made - so you can start laying tracks straight away. On the board you can assemble the tracks from the Start Set and you are ready to go. When you are finished, you take off the locomotive and the cars and cover the board with the supplied lid. This saves you the time of assembling and disassembling the tracks again. You'll also save yourself the annoyance of it not running. After disassembling and reassembling the tracks several times, the contacts on the track couplers will loosen and the trains will stop running well. You can then put the board and tracks on a cabinet, under a bed, or stand it on its side and against a wall. In this case, the tracks must be glued to the board in several places with a hot melt gun. And you can also have a landscape and a station. The control electronics are stored inside the board, so they don't get in the way and get lost anywhere. If you want to leave everything on the table. You don't have to take anything off and just use the supplied pads to stand on the Start board in the corners. On top of that you put the supplied lid. You are guaranteed a height of 8 cm above the board. And that's where the locomotives and cars will fit. The holes in the sides and bottom plate ensure access to all the places. The boards can be joined side by side to give you a much more solid track surface. Everything fits together. When you're done riding, the 2 boards with the tracks glued on can always be simply "folded" against each other - screwed onto the sides of the HCT9812H connection board, cover between the sides with the supplied covers and tidy up. Everything is thus protected and does not dust into the track. This gives you much more time to ride.