1 digitally controlled electric locomotive class 140
3 self-unloading wagons
1 z21 start
1 Z21 multiMAUS
1 plug-in power supply Ballast bed tracks for a track oval with radius R1 (4 x 9100, 8 x 9120), electrical connection material. Size of track layout: 85 cm x 40 cm.
When you're done riding, the 2 Start boards with the tracks glued on can always be simply "folded" against each other - screwed onto the sides of the HCT9812H connection board, cover between the sides with the supplied covers and tidy up. Everything is thus protected and does not dust into the track. This gives you much more time to ride.
START board 90 x 60 x 10 cm ASSEMBLED with cover. On the board you assemble the tracks from the Start Set and you can ride. When you are finished, you take off the locomotive and cars and cover the board with the supplied lid. This saves you time in assembling and disassembling the tracks again. You'll also save yourself the annoyance of it not running. After disassembling and reassembling the tracks several times, the contacts on the track couplers will loosen and the trains will stop running. You can then put the board and tracks on a cabinet, under a bed, or stand it on its side and against a wall. In this case, the tracks must be glued to the board in several places with a hot melt gun. And you can also have a landscape and a station. The control electronics are stored inside the board, so they don't get in the way and get lost anywhere.
When you're done riding, the 2 Start boards with the tracks glued on can always be simply "folded" against each other - screwed onto the sides of the HCT9812H connection board, cover between the sides with the supplied covers and tidy up. Everything is thus protected and does not dust into the track. This gives you much more time to ride.
START board 120 x 80 x 10 cm with cover. The board is delivered ready-made - so you can start building straight away. Assemble the tracks from the Start Set on the board and you are ready to go. When you are finished, you take off the locomotive and cars and cover the board with the supplied lid. This saves you time in assembling and disassembling the tracks again. You'll also save yourself the annoyance of it not running. After disassembling and reassembling the tracks several times, the contacts on the track couplers will loosen and the trains will stop running. You can then put the board and tracks on a cabinet, under a bed, or stand it on its side and against a wall. In this case, the tracks must be glued to the board in several places. And you can also have a landscape and a station. The control electronics are stored inside the board, so they don't get in the way and get lost anywhere. If you want to leave everything on the table. You don'
z21 start Digitalset: Diesel locomotive class 132 with tank wagon train of the railway company of the German Democratic Republic (Deutsche Reichsbahn).
Contents:
1 diesel locomotive class 132
3 tank wagons
1 z21 start
1 Z21 multiMAUS
1 plug-in power supply
ROCO LINE track layout (with bedding):
12 curved tracks R2, 9 straight tracks G1, 1 straight track G, 1 feeder track (G)
Size of track layout: approx. 215 x 100 cm
Analogue Start Set: Class 80 steam locomotive with a set of signs for different railway administrations (DB, NS, SZD, SBB, NSB, PKP, MAV, RENFE, ÖBB, FS, SNCF, CSD, SNCB, DR, DSB, SJ) and a passenger train.
