Pokouším se připojit k serveru...

Připojení k serveru bylo ztraceno. Vyčkejte na znovuobnovení stránky, nebo ji obnovte ručně.

CONTINUE SHOPPING
MAIN MENU


Our specialisation


Hacker Trains Systems
MAIN CATEGORIES
Blog / Articles
CREATE AN ACCOUNT
AND GET A PERMANENT DISCOUNT 10%
AND OTHER BENEFITS
REGISTRATION
New
IN STOCK
I-Track H0 3x1 meter complete track set
1 055,38€
DETAIL
IN STOCK
SA struts for the installation of the next floor of the track. The SA posts are 140 mm high and have a special design that provides the necessary strength to be used in any location for the installation of any I-Track system board. The I-Track plates are self-supporting - they have a special construction that guarantees rigidity and very low weight. The reinforcing crossbars have holes that can be used for cable installation. Holes in the underside of the board ensure access to all locations. So in a moment, using SA posts, you can easily create a bridging section of track or create a "hidden station" at any point on the track. Any board from the I-Track range can be used. You can also use the SA posts to install the boards side by side or on top of each other to create several levels as required.
15,99€
DETAIL
IN STOCK
SA struts for the installation of the next floor of the track. The SB posts are 80 mm high and have a special design that provides the necessary strength to be used in any location for the installation of any I-Track system board. The I-Track plates are self-supporting - they have a special construction that guarantees rigidity and very low weight. The reinforcing crossbars have holes that can be used for cable installation. Holes in the underside of the board ensure access to all locations. So in a moment, using SA posts, you can easily create a bridging section of track or create a "hidden station" at any point on the track. Any board from the I-Track range can be used. You can also use the SA posts to install the boards side by side or on top of each other to create several levels as required.
13,63€
DETAIL
IN STOCK
For the laying of single and multi-track tracks, you need to ensure both the correct radius and the mutual distance and coaxiality of the tracks. I-Track Distance B ensure that the tracks are placed correctly on level boards. They are designed for use with I-Track curved or straight templates.
6,43€
DETAIL
IN STOCK
For the laying of single and multi-track tracks, you need to ensure both the correct radius and the mutual distance and coaxiality of the tracks. Use the I-Track Distance Segments B on the flat boards to ensure that the tracks are positioned correctly. Use I-Track templates with the required radius or straight according to the required track shape, and straighten them and assemble them into the required shape. You can secure the segments by screwing them to the base with the supplied screws. Lay the rails on the track bed, slide the track distances B into the holes in the templates and press the rails against the track bed. You screw the rails or glue them with CA Hacker glue to the track bed. I-Track Distances B are designed for laying tracks with a bedding to ensure the correct mutual position of the tracks. The set contains 12 Spacers B, 6 templates according to the selected radius or straight.
13,52€
DETAIL
IN STOCK
For the laying of single and multi-track tracks, you need to ensure both the correct radius and the mutual distance and coaxiality of the tracks. Use the I-Track Distance Segments F on the flat boards to ensure that the tracks are positioned correctly. Use I-Track templates with the required radius or straight according to the required track shape, and straighten them and assemble them into the desired shape. You can secure the segments by screwing them to the base with the supplied screws. Lay the rails on the track bed, slide the track distances F into the holes in the templates and press the rails against the track bed. Use distances denser in the radii, larger distances are enough on the plane. Screw the rails or glue them with Hacker CA glue to the rail base. I-Track Distance F are designed for laying "flexi" tracks to ensure the correct relative position and radius of the track curve. The set contains 12 F spacers, 6 templates (30 °) according to the selected radius or straight.
12,99€
DETAIL
IN STOCK
For the laying of single and multi-track tracks, you need to ensure both the correct radius and the mutual distance and coaxiality of the tracks. Use the I-Track Distance Segments B on the flat boards to ensure that the tracks are positioned correctly. Use I-Track templates with the required radius or straight according to the required track shape, and straighten them and assemble them into the required shape. You can secure the segments by screwing them to the base with the supplied screws. Lay the rails on the track bed, slide the track distances B into the holes in the templates and press the rails against the track bed. You screw the rails or glue them with CA Hacker glue to the track bed. I-Track Distances B are designed for laying tracks with a bedding to ensure the correct mutual position of the tracks. The set contains 12 Spacers B, 6 templates according to the selected radius or straight.
14,05€
DETAIL
IN STOCK
For the laying of single and multi-track tracks, you need to ensure both the correct radius and the mutual distance and coaxiality of the tracks. Use the I-Track Distance Segments F on the flat boards to ensure that the tracks are positioned correctly. Use I-Track templates with the required radius or straight according to the required track shape, and straighten them and assemble them into the desired shape. You can secure the segments by screwing them to the base with the supplied screws. Lay the rails on the track bed, slide the track distances F into the holes in the templates and press the rails against the track bed. Use distances denser in the radii, larger distances are enough on the plane. Screw the rails or glue them with Hacker CA glue to the rail base. I-Track Distance F are designed for laying "flexi" tracks to ensure the correct relative position and radius of the track curve. The set contains 12 F spacers, 6 templates (30 °) according to the selected radius or straight.
13,57€
DETAIL
IN STOCK
For the laying of single and multi-track tracks, you need to ensure both the correct radius and the mutual distance and coaxiality of the tracks. I-Track Distance B ensure that the tracks are placed correctly on level boards. They are designed for use with I-Track curved or straight templates.
5,94€
DETAIL
IN STOCK
For the laying of single and multi-track tracks, you need to ensure both the correct radius and the mutual distance and coaxiality of the tracks. Use the I-Track Distance Segments B on the flat boards to ensure that the tracks are positioned correctly. Use I-Track templates with the required radius or straight according to the required track shape, and straighten them and assemble them into the required shape. You can secure the segments by screwing them to the base with the supplied screws. Lay the rails on the track bed, slide the track distances B into the holes in the templates and press the rails against the track bed. You screw the rails or glue them with CA Hacker glue to the track bed. I-Track Distances B are designed for laying tracks with a bedding to ensure the correct mutual position of the tracks. The set contains 12 Spacers B, 6 templates according to the selected radius or straight.
14,41€
DETAIL
IN STOCK
For the laying of single and multi-track tracks, you need to ensure both the correct radius and the mutual distance and coaxiality of the tracks. Use the I-Track Distance Segments F on the flat boards to ensure that the tracks are positioned correctly. Use I-Track templates with the required radius or straight according to the required track shape, and straighten them and assemble them into the desired shape. You can secure the segments by screwing them to the base with the supplied screws. Lay the rails on the track bed, slide the track distances F into the holes in the templates and press the rails against the track bed. Use distances denser in the radii, larger distances are enough on the plane. Screw the rails or glue them with Hacker CA glue to the rail base. I-Track Distance F are designed for laying "flexi" tracks to ensure the correct relative position and radius of the track curve. The set contains 12 F spacers, 6 templates (30 °) according to the selected radius or straight.
13,94€
DETAIL
IN STOCK
For laying multi-track tracks - you ensure the mutual distance and concentricity of the tracks. Slide the H-segments onto the rails. You put them denser in curves, larger distances are enough on the plane. You screw the rails or glue the CA with Hacker glue to the subsoil. You take off the distance H and use it for laying other tracks. Distances are available for H0, TT and N pitches. The set contains 20 H-segments.
8,22€
DETAIL

+420 313 564 381
[email protected]
Hacker Model Production a.s.
Zahradní 465, 270 54 Řevničov (map)
Czech Republic
ID NUMBER: 63271532, Vat ID: CZ63271532

OPENING HOURS
MON - THURS: 9:00 - 16:00
FRI: 9:00 - 14:00
SO: by telephone appointment

Write to us
Please enter your name.
Please enter your phone number
Please enter your e-mail
Please enter the text
You must agree to process data
All rights reserved &Copy; 2023 Hacker Model Production a.s. | Cookies
Creation of the system InGenius Webdesign